Replacement of cleaner nozzle 106901PA274
Step 1
The cleaner nozzle is secured with adhesive. If it is difficult to loosen, it can be heated with a blow-dryer or similar. This will cause the residual adhesive to detach.
Step 2
Using locking pliers, the cleaner nozzle can then be twisted out of the flexible hose (106901BP072).
Step 3
The cleaner nozzle is removed from the flexible hose.
Step 4
Now remove any residual adhesive from the double nipple with a steel brush.
Step 5
Apply locking compound or adhesive to the double nipple of the flexible hose.
Step 6
The new cleaner nozzle (106901PA274) can now be installed using locking pliers. Always make sure the cleaner nozzle is tightened firmly in place before the drain cleaner is used again.