The Drain Cleaner Nozzle Adapter connects Sieger nozzles with a 5/8” screw connection to drain cleaners with a 1/2″ connection. This special drain cleaner adapter …
The Drain-Jet Detection Nozzle 15° is used with the Sieger Proxus drainage tracking system. The transmitter is screwed at the front on the nozzle. This is then inserted in the …
The special Drain-Jet nozzle 15° has been developed for optimal cleaning at relatively low water pressure. The nozzle features one forward-facing jet to loosen dirt …
The special Drain-Jet nozzle 15° is designed for optimal cleaning. The nozzle has 4 spray holes at the front to spray the dirt loose. At the back, 12 flush holes are positioned at an angle of 15° to flush out the loosened dirt.
The Drain-Jet nozzle 15° ø60 is the solution for cleaning larger diameter drainage pipes from 60 mm. The nozzle features one front-facing jet at the…
The Drain-Jet 15° R100 jetting head with a diameter of 100 mm is the solution for cleaning drain pipes with a larger diameter as from 100 mm. The jetting head has one jetting hole at the front …
The Drain-Jet nozzle 15° R125 is the solution for cleaning larger diameter drainage pipes from 125 mm. The nozzle features one jet hole at the…
The Drain-Jet nozzle 15° R75 is the solution for cleaning larger diameter drainage pipes from 100 mm. The nozzle features one front jet at the …
he Drain-Jet 30° 12G jetting head is used when drain pipes have stubborn dirt. The jetting head has one jetting hole at the front to loosen dirt. There are 12 flushing holes on the rear under …
The Drain-Jet 30° 3G jetting head has been developed to clean drain pipes to best advantage that are located in (greasy) clay soil. The jetting head has one jetting hole at the front to loosen …
The ferrule ensures the hose is clamped onto the hose tail. Using ferrules is also convenient when a section of the hose needs repair. In that case, a …
The flexible hose is the final section of hose connected to the flushing hose. Nozzles can be mounted onto the flexible hose. Because this hose is highly flexible, bends and …
This hose connector allows you to connect two hoses with a diameter of ø27 mm.
The hose tail 5/8″ is mounted at the end of the flushing hose. The hose tail is the connection point where the start of the flexible hose is connected. The hose tail is inserted into …
